Friday, 11 March 2011

LASER Induced Ignition Of Gasoline Direct Injection Engines

 Laser ignition has become an active research topic in recent years because it
has the potential to replace the conventional electric spark plugs in engines
Compared to conventional spark ignition. laser ignition allows more flexible
choice of the ignition location inside the combustion chamber with the possibility to ignite even inside the fuel spray .Modern engines are required to operate under much higher compression   ratios, faster compression rates, and much leaner fuel-to-air ratios than gas engines     today. It is anticipated that the igniter in these engines will face with pressures as high        as 50MPa and temperatures as high as4000 K. Using the conventional ignition system, the required voltage and energy must be greatly increased (voltages in excess of 40 kV) to reliably ignite the air and fuel mixture under these conditions. Increasing the voltage and energy doesnot always improve ignitability but it does create greater reliability problem.
      Experiments with the direct injection engine have been carried out at the
fundamental wavelength of the Nd:YAG laser as well as with a frequency
doubled system Experiments show that above a certain threshold intensity of
the laser beam at the window even highly polluted surfaces could be cleaned
with the first laser pulse  which is important for operation in real world engines.
        Economic as well as environmental constraints demand a further reduction in the fuel consumption     and the exhaust emissions of motor vehicles. At the moment, direct injected fuel engines show the highest potential in reducing fuel consumption and exhaust  emissions.Unfortunately, conventional spark plug ignition shows a major disadvantage with modern spray-guided combustion processes since the ignition location cannot be chosen optimally. It is important that the spark plug electrodes are not hit    by  the  injected    fuel   because    otherwise severe   damage will occur.
Additionally, the spark plug electrodes can influence the gas flow inside the combustion chamber.It is well know that short and intensive laser pulses are able to produce an”optical breakdown” in air. Necessary         intensities are in the range between 1010-1011W/cm2.1, 2 At such        intensities, gas molecules are dissociated and ionized within the vicinity of the focal spot of a laser beam and a hot plasma is generated. This plasma is heated by the incoming laser beam and a strong shock wave occurs. The expanding hot plasma can be used for the ignition of fuel-gas mixtures.

No comments:

Post a Comment